One cut at a time.
Fully CNC-machined in Washington State from 6061-T6 aluminum. The visible tool paths are part of how it’s made, not a finish trying to look like something else.
OMEN V3 PEDAL
The Omen V3 is a proper evolution to our beloved Omen platform. Fully CNC’d in Washington State from 6061-T6 aluminum, the Omen V3 gets a completely redesigned platform shape while keeping the same planted feel and tunable grip Tenet pedals are known for.
Inside, the Omen V3 gets our most advanced sealing system yet. A four-seal layout with an inner O-ring, mid wiper seal, exterior interlocking dust seal, and end cap seal helps keep water out, reduce wear, and extend pedal life in the most demanding riding conditions. Less contamination, smoother service intervals, and better longevity.
We put the Omen V3 through EFBE’s Tri-Test E-Gravity protocol, one of the most stringent test standards in the bike industry. That certification alone validates that it's built to endure anything thrown at it. Add in Tenet’s lifetime warranty, free pedal refresh, and free bearings and bushings for life, and you have a flat pedal built for long-term reliability in the most demanding scenarios.
OMEN V3 PEDAL
Sale price$307.00
Choose options
OMEN V3 PEDAL
Sale price$307.00
EFBE Tri-Test E-Gravity Certified
The Nitty Gritty
- Platform
- 110 × 105 mm
- Dual concavity
- 2 mm
- Weight
- 440 g / set
- Spindle
- Stainless steel
- Body
- Fully CNC-machined 6061-T6 aluminum with additional weight-reduction machining · Washington State, USA
- Internals
- 3 sealed bearings + 1 IGUS bushing per pedal
- In the box
- One pair of pedals, pin washers and grub screws
OMEN V3 PEDAL
Made here. Ridden here.
There’s a lot to love about a beautifully machined chunk of aluminum. The Omen V3 is our made-in-Washington flat pedal: the familiar planted stance, a newly refined body, and tool paths we’re happy to leave on show.
Why this one
Familiar under your feet.
The 110 × 105 mm platform and 2 mm dual concavity keep the stance we love. A chamfered leading edge helps glance off unexpected rocks and roots.
The Omen sweet spot.
480 g per set with a heat-treated chromoly spindle. Choose it for the local machining and full V3 internals; choose SL if shedding another 40 g matters to you.
Three stages, four seals
Water finds a way.
After enough PNW winters in Bellingham, we can confirm that water indeed does find a way. The V3 internals use three seals at the crank side, plus a fourth at the end cap. They are not four versions of the same seal stacked on top of each other. Together they form a labyrinth, with each seal doing a different job as you move toward the bearings.
First line of defense
Interlocking outer dust seal
The interlocking shape helps keep dust, dirt and trail grit from working their way into the pedal body.
Second barrier
Mid-level wiper seal
Sitting behind the dust seal, the wiper is focused on keeping water out before moisture can reach the internals.
The last stop
Inner O-ring
The O-ring adds damping at the spindle interface and acts as the final line of defense against moisture ingress.
From the other side
End-cap O-ring
It seals the end cap and protects the bearing end of the pedal from water and contamination entering from the opposite side.
Beyond the baseline
EFBE Tri-test E-Gravity Certified
What does that actually mean? ISO safety standards give bike parts a baseline to meet. But modern riding asks a lot of a pedal, and those standards don’t tell the whole story. That’s where EFBE’s Tri-Test comes in.
It goes beyond the standard requirements with three kinds of testing: fatigue, maximum load and overload. Think repeated hard use, heavy loads and those brief moments when a part gets pushed beyond its normal limits. Together, they help recreate the stresses a component can see over its riding life.
Our V3 pedals have passed EFBE’s Tri-Test E-Gravity certification. We still put plenty of miles into testing them ourselves. This adds independent testing behind the parts we trust under our own feet.
Learn more about EFBE’s Tri-Test
We made them. We’ll back them.
Keep them on your bike.
Free Pedal Refresh
One free refresh in your first year, for US customers.
Refresh detailsFree wear parts for life
Free bearings and bushings for life. Wear shouldn’t be the reason you retire a pedal.
Get supportWe stand behind them
Lifetime warranty against manufacturing defects, plus lifetime crash replacement when things go sideways.
Warranty and crash replacement30-day money-back guarantee
The best test is
your own trails.
Put them on your bike and go ride. If they’re not for you, send them back within 30 days for a refund, minus return shipping.
Choose your colorSame family. Different reasons.
Find your kind of pedal.
Also in the family
OCCULT V3 PEDAL
$181.00 CAD
The original, refined. Custom-extruded and post-CNC body. Chromoly spindle. 460 g/set.
Explore OCCULT V3 PEDALYou’re looking at
OMEN V3 PEDAL
$307.00 CAD
Made in Washington. Fully CNC-machined body. Chromoly spindle. 480 g/set.
Review this pedalAlso in the family
OMEN SL PEDAL
$405.00 CAD
The lightest Omen. Extra machining. Stainless spindle. 440 g/set.
Explore OMEN SL PEDAL