COVEN WHEEL BUILD CALCULATOR
Professional wheel-building data for Tenet rims
Component dimensions are sourced from suppliers and are not physically verified by Tenet unless specifically noted. Actual parts may differ due to revisions, tolerances, or source-data errors. We recommend that you measure the rim, hub, spokes, and nipples before ordering or assembly. Results are estimates; the wheel builder is responsible for final spoke length and compatibility. Tenet is not responsible for loss, damage, or build issues caused by inaccurate third-party data or use of these results.
Calculated build
Awaiting dimensionsCalculation notes (0)
Hub database
Classic J-bend hubs with complete geometry. Each record shows where its dimensions come from; measure your hub when in doubt.
Show all hubs
| Hub | Position | Axle | PCD L / R | Center L / R | Spoke hole | Source |
|---|
Not seeing a hub you want? Recommend one!
Send Tenet the manufacturer, model, axle spacing, and brake interface. We’ll review its published geometry for the database.
Tenet rim specifications
Published values are references. Verify nipple seat diameter, nipple geometry, and component dimensions against the physical parts before ordering spokes.
| Rim | Size | NSD | Offset | Drilling | Tension | Status |
|---|